Good design does not remain on the surface, but thinks ahead. LA LINIA AQUA thinks ahead the water cycle. This innovative concrete block paving - a further development of our elegant classic LA LINIA with a finely blasted surface made of high-quality natural stone chippings - can be used to design outdoor areas that meet the highest aesthetic demands and at the same time have an infiltration rate that exceeds all prescribed DIN guideline values. Special joints ensure that rainwater can drain off particularly quickly between the 8-cm-thick diamond grey pavers, which are slip-resistant and can also withstand high traffic loads. LA LINIA AQUA is supplied in layers of nine different stone sizes. When laid, this results in a varied appearance that is reminiscent of sheet paving in the natural stone sector. The pavers have a CleanTop® surface protection with Clean Factor CF 90, which leads to reduced dirt absorption and also inhibits algae and moss formation; they are frost and de-icing salt resistant.
CleanTop®-Schutzsystem mit dem Clean Factor CF 90 (integraler Bestandteil des Produktionsprozesses):
|La Linia Aqua is delivered in layers.
Each layer contains:
2 units 50 x 27 x 8 cm,
2 units 44 x 21 x 8 cm,
2 units 40 x 21 x 8 cm,
2 units 36 x 21 x 8 cm,
2 units 36 x 15 x 8 cm,
2 units 34 x 15 x 8 cm,
2 units 27 x 15 x 8 cm,
2 units 23 x 15 x 8 cm,
1 unit 20 x 27 x 8 cm.
one layer = 1,19 m
All dimensions given are grid dimensions including spacers and joint proportion.
|specialty||m² per layer||m² per pallet||weight ca. kg per m²||calculation unit|
Sale in layers only.
One layer contains:
|-||AquaPrima, joint chippings 1/3|
|-||Chippings 2/5 mm|
|-||Filter-stable crushed stone mixture with a water permeabiliy of at least 5,4 x 10-5 (in m/s).
The dimensioning of the base course depends in each case on the traffic load and the nature of the subsoil.
In order for precipitation to flow to the deeper soil layers and thus ultimately to the natural water cycle, the paving bed and base course also require appropriate water permeability. For the base course, therefore, mineral mixtures must be used that have a water permeability of at least 5.4x10-5 (in m/s). This is the case, for example, with crushed stone in grain sizes 0/32, 0/45, 0/56, if the elutriable components (in % by weight) are 7%! After compacting the base layer, a paving bed of approx. 4 cm of chippings 2-5 mm is applied. After that, the pavement can be laid.
Bij een dergelijk patroon is de hoeveelheid te gebruiken materiaal sterk afhankelijk van de plaatselijke omstandigheden.